OneTouch® Delica® Plus Lancing Device

Description

The OneTouch® Delica® Plus Lancing Device provides a safe, easy way to obtain a drop of capillary blood from the fingertip. The device has 13 depth settings. The setting you choose must be deep enough to get a round drop of blood large enough for the meter to provide a blood glucose result.

1. Remove the lancing device cap
Remove the cap by rotating it and then pulling it straight off the device.
2. Cover the exposed lancet tip
Before removing the lancet, place the lancet protective cover on a hard surface then push the lancet tip into the flat side of the disk.
3. Eject the lancet
Holding the lancing device directed downwards, push the slider forward until the lancet comes out of the lancing device. If the lancet fails to eject properly, cock the device then push the slider control forward until the lancet comes out.
4. Replace the lancing device cap
Place the cap back onto the device; turn the cap or push the cap straight in to secure it. Ensure the cap is aligned as shown in the image.